2022 Exmark Lazer Z S-Series EFI LZS749AKC724A1
- Year 2022
- Make Exmark
- Model Lazer Z S-Series EFI
2022 Exmark Lazer Z S-Series EFI LZS749AKC724A1
2022 Exmark Lazer Z S-Series EFI LZS749AKC724A1
With the Lazer Z EFI S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.
Features may include:
Eco-Friendly- Reduces fuel consumption, fewer emissions and carbon footprint.
- Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
- Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
- Delivers up to 25% in fuel savings.
- Easy start in any altitude or climate condition (no manual choke).
- Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.
Engine
Engine Manufacturer
Kohler
Displacement
747
Emissions
Series: Command™ EFI
Rated Engine Speed
3,750 RPM
Air Filter
Heavy-duty canister air filtration system
Fuel System
Fuel Type
Gas EFI
Fuel System
Indicator: Electronic Sender
PTO
PTO Type
Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
Drivetrain
Drivetrain
Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Steering
Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Brakes
Parking Brake
Lever-actuated disc brake.
Wheels & Tires
Tires, Front Specification
24 x 12-12, 4 ply Turf Master® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
Tires, Rear Specification
24 x 12-12, 4 ply Turf Master®
Electric
Electrical
12-volt battery with 20-amp alternator.
Operational
Operating Speed
Forward: 0–10.0 mph (16 kmph) | Reverse: 0–6.0 mph (9.7 kmph)
Top Speed
Blade: Approximately 18,500 fpm.
Chassis
Frame Type
Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Lights and Safety
Safety Features
Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Dimensions
Spindle Diameter
Cutter Housing: 7.75" | Shaft: 25mm(.98")
Dimensions
Casters: .50"
Cutting Width
Deck: 72"
Width
84.9 in. (215.6 cm)
Length
Blades: 3 Blades at 24.50" | 86.1 in. (218.7 cm)
Height
Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70 in. (177.8 cm)
Capacities
Fuel Capacity
12-gallon (45.4-L)
Weights
Weight
Curb: 1305
Features
Seat Type
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Construction Material, Deck
Style: Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.