2022 Exmark Lazer Z X-Series LZX921GKA726A1

2022 Exmark Lazer Z X-Series LZX921GKA726A1

Swipe to View More

  • Year 2022
  • Make Exmark
  • Model Lazer Z X-Series
2022 Exmark Lazer Z X-Series LZX921GKA726A1

2022 Exmark Lazer Z X-Series LZX921GKA726A1

2022 Exmark Lazer Z X-Series LZX921GKA726A1

With our top-rated Lazer Z X-Series, there are plenty of boxes to check. For starters, it's now available as a 96-inch gas powered zero-turn mower. You can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60-, 72-, and 96-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Features may include:

Patented RED Technology
  • Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
A New Level of Comfort
  • Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
Rear Discharge Deck
  • Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
UltraCut Series 6 Deck
  • This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
Productivity
  • Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
Tool-less Belt Removal
  • Deck and hydro belt can be installed without using any tools.

Engine

Engine Manufacturer Kawasaki FX921V
Displacement 999
Emissions Series: V-Twin
Rated Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Engine Power 31 HP

Fuel System

Fuel Type Gas Carbureted
Fuel System Fuel Indicator: Electronic Sender

PTO

PTO Type Engagement: MagStop Electromagnetic 250-ft-lb clutch with spot brake

Drivetrain

Drivetrain Hydro-Drive| Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.

Brakes

Parking Brake Lever-actuated disc brake.

Wheels & Tires

Tires, Front Specification 24 x 12.0-12, NPT Tractus® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
Tires, Rear Specification Unibody, welded, heavy-duty 1.5" x 3" tubular steel.24 x 12.0-12, 4-ply Turf Master®

Electric

Electrical 12-volt battery with 15-amp alternator.

Operational

Operating Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
Top Speed Blade: Approximately 18,500 fpm.

Chassis

Frame Type Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.

Lights and Safety

Safety Features Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.

Dimensions

Spindle Diameter Blade Cutter Housing: 7.75" | Blade Shaft: 30mm (1.18")
Dimensions Casters: .50" thick caster yoke arms.
Cutting Width Deck: 72"
Width 84.9 in. (215.6 cm)
Length Blades: 3 Blades at 24.50" | 86.1 in. (218.7 cm)
Height Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) | 70.5 in. (179.1 cm)

Capacities

Fuel Capacity 12-gallon (45.4-L)

Weights

Weight Curb: 1294

Features

Seat Type Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Construction Material, Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | Deck Style: Floating Deck | Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.

Product Photography