2022 Exmark Radius S-Series Rear Discharge RAS730GKA60RA3
- Year 2022
- Make Exmark
- Model Radius S-Series Rear Discharge
2022 Exmark Radius S-Series Rear Discharge RAS730GKA60RA3
2022 Exmark Radius S-Series Rear Discharge RAS730GKA60RA3
The Radius rear discharge zero-turn mower comes with a UltraCut Rear Discharge deck. A 60” cut-width means you can cut more, quickly, while keeping clippings under control. Powered by Exmark engines, with Hydro-Gear integrated transmissions and up to 9 mph fwd. ground speed. The Radius S-Series improves productivity and provides maximum comfort
Features may include:
Radius Rear Discharge Deck- Available in 60-inch cutting width, the rear-discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck—all while keeping the operator clean.
- Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
- The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
- Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
- Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
Engine
Engine Manufacturer
Kawasaki
Displacement
726
Emissions
Series: V-Twin
Rated Engine Speed
3700 rpm
Air Filter
Donaldson Heavy Duty air cleaner
Fuel System
Fuel Type
Gas Carbureted
Fuel System
Fuel Indicator: Translucent Visual
PTO
PTO Type
Engagement: MagStop electromagnetic 125-ft-lb clutch
Drivetrain
Drivetrain
Hydro-Drive | Description: Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Steering
Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Brakes
Parking Brake
Lever-actuated pawl brake.
Wheels & Tires
Tires, Front Specification
23 x 10.5-12 Super Turf (142-4266) | Caster: 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings
Tires, Rear Specification
23 x 10.5-12 Super Turf (142-4266)
Electric
Electrical
12-volt battery with 15-amp alternator.
Operational
Operating Speed
Forward: 0–9.0 mph (14.5 kmph) | Reverse: 0–5.0 mph (8.0 kmph)
Top Speed
Blade: Approximately 18,500 fpm.
Chassis
Frame Type
Tractor: Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Lights and Safety
Safety Features
Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Dimensions
Spindle Diameter
Blade Cutter Housing: 7.75" | Blade Shaft: 25mm (.98")
Dimensions
Casters: .375" thick caster yoke arms
Cutting Width
Deck: 60"
Width
66.0 in (167.6 cm)
Length
Blades: 3 Blades at 20.50" | 84.3 in (214.1 cm)
Height
Cutting: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments | 70.2 inches (178.3 cm)
Capacities
Fuel Capacity
7-gallon (26.5-L)
Features
Seat Type
High back seat with foam padded seat cushion, armrests and integral safety switch
Construction Material, Deck
Style: Floating | Style Description: Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch. | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.