2022 Husqvarna® Power Gas Chainsaws 543 XP®

Information

2022 Husqvarna® Power Gas Chainsaws 543 XP®

The light and effective Husqvarna 543 XP® is developed for tree care professionals and skilled landowners. The combination of low weight and high chain speed leads to efficient limbing work. Our unique X-Torq® engine technology provides more power where you need it, including up to 20% less fuel consumption and 75% less exhaust emission.

Features may include:

X-Torq®

Delivers lower fuel consumption and reduced exhaust emission levels in accordance with the world´s most stringent environmental regulations.

Air Injection®

Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.

Adjustable oil pump

Allows you to control oil flow depending on application and weather conditions.

Auto return stop switch

Stop switch automatically resets to the ON position for easier starting.

LowVib®

System designed to reduce vibration levels to the operator, which lessens fatigue.

Magnesium crankcase

Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.

Smart Start®

The engine and starter have been designed so the machine starts quickly with minimum effort.

Side-mounted chain tensioner

Easier access to chain tensioning device.

Three-piece crankshaft

Forged three-piece crankshaft for maximum durability for the toughest applications.

Felling marks

Distinct, colored marks used for aiming the direction of timber fall.

Air Purge

Removes air from carburetor and fuel system for easy starting.

Inertia activated chain brake

Reduces the likelihood of injury due to kickback.

Photos

Highlights

  • Milltown, Wisconsin
  • 2022
  • Husqvarna® Power
  • Gas Chainsaws 543 XP®
  • Available

Specifications

  • 2022
  • Husqvarna® Power
  • Gas Chainsaws
  • 543 XP®
  • General
  • 43.1 cm³ (2.63 cu.inch)
  • 2.95 hp
  • 2.4 Nm
  • Maximum power speed: 9,600 rpm | Max engine/motor RPM: 14,500 rpm | Idling speed: 2700 rpm
  • module air gap: 0.02 in
  • emissions (CO2 EU V) 780 g/kWh
  • Husqvarna or equiv. at 50:1
  • Fuel consumption: 467 g/kWh (2.27 lbs/h) | Equivalent vibration level (ahv, eq) front handle: 4.5 m/s² | Equivalent vibration level (ahv, eq) rear handle: 4.2 m/s²
  • Sound power level, guaranteed (LWA):113 dB(A))| Sound power level, measured:112 dB(A) | Sound pressure level at operators ear: 101 dB(A)
  • Adjustable flow, no flow at idle
  • Electrode gap: 0.03 in | Pitch: .325"
  • Bar: 16 in | Recommended bar length, max: 18 in | Recommended bar length, min: 13 in
  • .050"
  • 0.57 US pint | Oil pump capacity Max: 13 ml/min | Oil pump capacity Min: 3 ml/min
  • excl. cutting equipment): 9.92 lbs |(excl. cutting equipment):9.92 lbs
  • Spark plug: NGK CMR7H
  • SP33G