2022 Toro Mowers 5000 Series 52" (132 cm) 25 HP EFI 747cc (72955)
- Year 2022
- Make Toro
- Model Mowers 5000 Series
2022 Toro Mowers 5000 Series 52" (132 cm) 25 HP EFI 747cc (72955)
Take productivity and comfort to a new level with the Z-Master 5000 with MyRIDE® Suspension System. Power through any job with a powerful 25 HP (18.4 kw) Kohler Command Pro EFI 747cc engine and tough 52" (132.1 cm) TURBO FORCE deck. Ride in comfort with the customizable MyRIDE Suspension System, featuring up to 3.6 inches of platform travel, to save your body from tough terrain.
Features may include:
Deluxe Handcrafted Seat with Arm Rests- Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
- The suspended operator platform allows up to 3.6” of travel (depending on model) and reduces impacts, bumps and vibrations. Easily and quickly adjust rear shock ride settings to personal ride preferences, without tools!
- High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
- The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
- (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
- High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
- 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
- Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
- The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
- A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Engine
Engine Power
25 HP (18.4 kw)
Engine Manufacturer
Kohler®
Engine Type
Command Pro EFI
Displacement
747cc
Air Filter
Heavy-Duty Canister Air Cleaner
Drivetrain
Drive System
Hydraulic unitized pumps and wheel motors
Steering
Controls: 1-5/8" (4 cm) dia. levers; adjustable
Wheels & Tires
Tires, Front Specification
13" x 6.5"- 6" (33 cm x 16.5 cm - 15.2 cm) flat-free semi-pneumatic
Tires, Rear Specification
23" x 9.5" -12" (58.4 cm x 24.1 cm - 30.5 cm)
Operational
Top Speed
Blade: 18,500+ ft/min (5,640 m/min)
Operating Speed
Ground: 10 mph (16.1 kph) forward
Hydraulics
Hydraulic Type
Fluid: Premium synthetic
Dimensions
Dimensions
Carrier Frame: 3" x 1-1/2" (7.6 cm x 3.8 cm) tubular steel | Platform Travel: 3.6" | Spindle Housing: 9" (22.9 cm) diameter cast aluminum | Blade Type: 1/4" (6 mm) thick heat-treated steel | ISO Mounts: Qty 4, 2.5" 3-D isolation mounts
Height
Cut: 1" - 5.5" in 1/4" (2.5 - 14 cm in 6 mm) increments
Capacities
Fuel Capacity
Gasoline - 12 gallons (45 L) single-point fill
Features
Features
Deck Design: 80-Grade 7-gauge 52" (132 cm) TURBO FORCE® w/bull-nose bumper | Comfort Platform: MyRIDE® Suspension System | Shocks: 1 Center / 2 Rear
Chute Type
Discharge: Rubber
Seat Type
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Spindle Type
Bearings: Greaseless ball bearings
Adjustability
5 point adjustment on rear shocks | Platform Travel: 3.6"