2022 Toro Mowers 5000 Series 60" (152 cm) 25 HP EFI 747cc (72921)
- Year 2022
- Make Toro
- Model Mowers 5000 Series
2022 Toro Mowers 5000 Series 60" (152 cm) 25 HP EFI 747cc (72921)
Save time and cleanup with a mower that can trim on either side of the deck, keeping sidewalks and flowerbeds clipping-free. With a 26.5 hp (20 kw) Kohler® Command Pro® EFI 747cc engine, 60" (152 cm) TURBO FORCE deck, Michelin X Tweel Turf Tires and a deluxe, handcrafted seat, Toro’s Rear Discharge Z Master® 5000 is built for productivity.
Features may include:
Michelin® X® Tweel® Turf Tires- No air pressure to maintain, no flat tires, no compromises. Get extra long wear life two to three times that of a pneumatic tire at equal tread depth.
- The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
- (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
- Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
- 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
- The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
- The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
- A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
- Cools quickly for enhanced durability and performance.
Engine
Engine Power
26.5 hp (20 kw)
Engine Manufacturer
Kohler®
Engine Type
Command Pro EFI
Displacement
747cc
Air Filter
Heavy-Duty Canister Air Cleaner
Ignition
Electric
Drivetrain
Clutch
Electromagnetic
Drive System
Unitized Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)
Steering
Controls: 1-5/8" (4.1 cm) diameter grips; adjustable, dampened
Wheels & Tires
Wheels
Caster Tires: 13" X 6.5" – 6" (33 cm x 16.5 cm – 15.2 cm) Flat-Free Semi-Pneumatic | Drive Tires: Airless radial 24" (60.96 cm) Michelin X Tweel Turf Tires
Operational
Top Speed
Blade Tip: 18,500+ ft/min (5638.8 m/min)
Operating Speed
Ground: 10 mph forward (16.1 kph)
Hydraulics
Hydraulic Type
Fluid: Premium synthetic
Dimensions
Dimensions
Carrier Frame: 3" x 1.5" x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
Cutting Width
60" (152.4 cm)
Height
Cut: 1 in - 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments
Capacities
Fuel Capacity
Gas/12 gal (45.4 L)
Weights
Weight
1,271 lbs. (576.5 kg)
Features
Features
Deck Design: 80-Grade 7-gauge 60" (152.4 cm) TURBO FORCE® Rear Discharge w/ bull-nose bumper | Number of Blades: 3 | Spindle Bearings: Greaseless ball bearings | Blade Type: .204” (.5 cm) heat-treated steel
Chute Type
Discharge: Rubber
Seat Type
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Spindle Type
Housing: 9" (22.9 cm) diameter cast aluminum